1. 制冷配件：本機制冷控制系統元器件全部為進口件，可以可靠地保證整機的正常運行和達到最佳的能效比。

The refrigeration accessories: the control system components ofrefrigeration system are all imported .It  can ensure the  reliability of  the normal operation and achieve the best effect.

制冷壓縮機采用谷輪/丹佛斯美優樂/臺灣漢鐘制冷壓縮機/博洋藍海壓縮機。

Refrigeration compressor using DANFOSS  Maneurop /Taiwan HANBELL refrigeration

制冷控制系統為世界頂級名牌丹麥丹佛斯公司產品。

compressor. Refrigeration control system is from the world's top brand Denmark danfoss products

2. 制冷系統穩定高效：本公司所用的丹佛斯高低壓控制器的高壓級能感受冷媒冷凝壓力，一旦超負荷引起冷媒冷凝壓力過高，便能自動脫跳，從而保護壓縮機。

The refrigeration system is stable and efficient: holysun use DANFOSS  high pressure level of high and low voltage controller  , it can sense REF. operating pressure, once the overload cause condensation REF. pressure is too high, can automatically jump off to protect the compressor

3. 換熱高效：本公司采用板翅式換熱器，具有以下特點： The heat transfer efficiency :holysun adopts fin heat exchanger with the following features:

傳熱效率高，溫度控制性好Heat transfer efficiency is high, the temperature controlling is good

翅片的特殊結構，使流體形成強烈湍流，從而有效降低熱阻，提高傳熱效率。其傳熱系數也比列管式換熱器高5-10倍。The special Fin structure makes fluid form strong turbulence, thus effectively lower the heat resistance and improve the heat transfer efficiency. The heat transfer coefficient is  5-10 times higher than tube heat exchanger

傳熱效率與功耗比低，可精確控制介質溫度。Heat transfer efficiency and power consumption is low, can precisely control the temperature of the medium.

結構緊湊Compact structure

傳熱面積密度可高達17300 m2/m3，一般為管殼式換熱器的6-10倍，最大可達幾十倍。

Density of heat transfer area can be as high as  17300 m2 / m3, it is generally  6-10 times for tubular heat exchanger,(even dozens of times if required )

輕巧，經濟性好Lighter and economical

翅片很薄，而結構很緊湊、體積小、又可用鋁合金制造，因而重量很輕，方便運輸。

Fin is very thin, and the structure is compact with small volume, and can be produced by aluminum alloy which are very light and convenient for transportation.

可靠性高High reliability

全釬焊結構，杜絕了泄漏可能性。同時，翅片兼具傳熱面和支撐作用，故強度高。

full soldering welding structure to eliminate possibility of the leakage. At the same time, the fin maintain the fucnction of heat transfer surface and supporting funct, thus the strength is high

防腐防銹The anticorrosion

材質主要是鋁鎂合金，杜絕了普通碳鋼管殼式換熱器容易腐蝕，產生銹渣堵塞自動排水器和過濾器的現象。

Main material is aluminium magnesium alloy, which eliminate corrosion of the common carbon steel tubular heat exchanger , avoid the phenomenon of  rust slag blocking for automatic drainer and filter.

4. 防腐處理：本公司提供壓力容器制造合格證，在容器內外表面作防腐處理，可有效地防止管壁生銹及結垢，得到更優的氣源品質，避免經常清洗自動排水器，從而影響到冷干機排水。 The embalming process: holysun provides pressure vessel manufacture quality certificate, also anticorrosive processing in both internal and external surface of containers , which can effectively prevent wall rust and scaling, get better air quality, and avoid frequenently  cleaning the automatic drainer .

5. 除水徹底：在蒸發器末端，除裝有常規的擋板外，另外裝有旋風式氣水分離器，可將在蒸發器中未除盡的細小水珠進一步去除，防止水滴進入預冷器二次蒸發，使水混入輸氣管，避免了氣中帶水的現象發生。totally removing water : in the bottom of  evaporator, besides of  regular baffle outside, holysun equipped with new gas liquid separator, which can further removes tiny drops in the evaporator, prevent water droplets the second evaporation tanks after entering into evaporator  , and mix water into pipelines, Thus to avoid the phenomenon of the liquid water in compressed air.

6. 防堵設計：本公司在排水器之前設置了獨特的防堵過濾裝置（參見下圖），將管道中的銹渣和固體雜質從冷凝液中分離出來，并將其沉積在底部，用戶可以定期手動排放。經分離后的冷凝液由排水器自動排出機外。這樣可以明顯提高自動排水器的工作效率，延長了排水器的使用壽命。 Blocking proof design: HOLYSUN is set the unique blocking proof in the drainage before filter (see chart below), separate the rust slag and solid impurities of pipeline from the condensed liquid, and deposit at the bottom, the user can regularly manually remove  them. After the separation of the drainage device will be automatically condensated from cake layer. This can obviously increase the automatic drainer efficiency and prolong the service life

of the draine

① 控制——采用儀表型控制系統，運行可靠、操作方便。 control---use the instrument type control system, reliable operation, easy to operate.

② 遠程控制功能——控制系統預留聯鎖控制接口及遠程控制接口，并實時反饋狀態信號。 the remote control function---control system reserves interlocks control interface and remote control interface, and in time feedback state signals.

③ 電氣元件——選用施耐德/正泰公司(SCHNEIDER)的產品. electrical components---choose SCHNEIDER products.